back wheel wobble
Might be lucky and be repairable with helicoils ,then new studs and loctite and back together. Be worth using nordlock washers if not certainly best to get some new wavy washers and use loctite on the nuts.
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Agreed, time serts might be an option but you need to get a good engineer to fit them for this to work on the end plate, they need to be drilled dead straight and central, so take your end plate as well.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
burridge01
- Posts: 82
- Joined: Sat Jun 13, 2009 1:24 pm
- Location: SELHURST PARK
- Contact:
Go see the big boy ratty"sigh"ratty wrote:found the problem, end plate was loose,its pulled every stud out and chewed all the nuts up, can this be repaired properly or should i be looking for a new engine,
Or was it THAT big boy"again",,,,,,,,,,,,,,,,,,bigger"sigh" 
Brighton F.C-LOL