http://www.mitolambretta.com/product_in ... 47b5b3a6ce
Discuss ;
Twin Spark Cylinder head
-
- registered user
- Posts: 395
- Joined: Tue Feb 22, 2011 9:06 pm
- Main scooter: Jet 200
- Contact:
I was looking at them today, I guess its an either or situation. You can choose where the plug is located and the other hole is plugged up ?
-
- registered user
- Posts: 740
- Joined: Wed Jan 07, 2009 10:57 am
- Location: drax,near selby,north yorkshire
- Contact:
not sure about this,tried it 30 plus years ago one plug used and the other soots up,can two plugs spark from one trigger head?not sure the black trigger head is already suspect for failure,team rayspeed have been using stock items for while now with failures, hope they come up with a reliable solution.
back to you! like tennis
back to you! like tennis
169 Euros plus p+p
reading the write up on the link,if the centre plug fails just switch over to the standard plug position, as the centre plug is a pain to remove on the side of a road I don't think they're to be used at the same time plus an option to have a blanking plug,looks similiar to a GT head but not as good looking
I am playing all the right notes, but not necessarily in the right order.
I know its one plug or the other ,but surely some body could make it work with 2 plugs
i know that it has been done running two plugs together but i cant see much point tbh
it only becomes a good idea with very large capacity cylinders as theres burn time issues
it only becomes a good idea with very large capacity cylinders as theres burn time issues
Its in bits scooter club: www.facebook.com/groups/132415046859320