ScroteRS Disc Brake Windows
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
I have a ScroteRS disc hub (part of it anyway) and their disc windows, what's the effin' secret to fit the windows into the hub?
Turn On, Tune In, Cop out!
- Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
They need to be warmed up to make them more pliable. Hot water of a hair drier will do it.
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Tried that with boiling water, no joy
Do they go in from the front or the back, longer edge in first or smaller edge in first, or just file the feckers down and Araldite them in???
Do they go in from the front or the back, longer edge in first or smaller edge in first, or just file the feckers down and Araldite them in???
Turn On, Tune In, Cop out!
left mine out
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
I just sussed it, in from the back and squeeze in top and bottom and clip in from left to right, not a good fit though, possibly due to the thickness of three stage chrome powder coat, might have to take these ones out too Mark
Turn On, Tune In, Cop out!
i dont like the look of them personally ..mark wrote:left mine out
Its in bits scooter club: www.facebook.com/groups/132415046859320