ScroteRS Disc Brake Windows

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

I have a ScroteRS disc hub (part of it anyway) and their disc windows, what's the effin' secret to fit the windows into the hub? :?
Turn On, Tune In, Cop out!
User avatar
Doom Patrol
registered user
Posts: 1823
Joined: Wed Jan 07, 2009 5:03 pm
Main scooter: Jet 200
Location: Second star on the right and straight on till morning
Contact:

They need to be warmed up to make them more pliable. Hot water of a hair drier will do it.
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

Tried that with boiling water, no joy :-(
Do they go in from the front or the back, longer edge in first or smaller edge in first, or just file the feckers down and Araldite them in??? :evil:
Turn On, Tune In, Cop out!
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

I just sussed it, in from the back and squeeze in top and bottom and clip in from left to right, not a good fit though, possibly due to the thickness of three stage chrome powder coat, might have to take these ones out too Mark :-?
Image
Image
Image
Turn On, Tune In, Cop out!
User avatar
RICSPEED
registered user
Posts: 3334
Joined: Sun Jan 04, 2009 11:30 pm
Location: YORK

mark wrote:left mine out
i dont like the look of them personally .. ;)
Its in bits scooter club: www.facebook.com/groups/132415046859320
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot] and 24 guests