I need a powerjet for my TMX 35. Best one and supplier?
'Cam Lam'???
Answers needed.
I need to get one on order ASAP.
Thanks as always
Power jet - who from and best one?
speak to tik or micky dale ,they got em, tiks is fitted.
win or lose have a booze
- Chutney Brownlove
- registered user
- Posts: 56
- Joined: Sat Apr 11, 2009 9:54 am
- Contact:
There's a Greek 2 stroke nutter selling them on ebay for cheap. I bought one just in case, wich has never been out of the bag. The TMX is a great carb, but is very limited on a tuned motor.
- jonashford
- registered user
- Posts: 445
- Joined: Wed Oct 20, 2010 4:47 pm
- Main scooter: Lambretta SX RB235
- Location: GRIMSBY
- Contact:
I use a cam lam one on my tmx 35, works well, u dont say y u want one tho?
I also have the one from the Greek chap on ebay at the price he was selling them at I got one just as a spare, apart from the pipe it looks the same. My mate is using one on on his tmx 35 it works fine
I also have the one from the Greek chap on ebay at the price he was selling them at I got one just as a spare, apart from the pipe it looks the same. My mate is using one on on his tmx 35 it works fine
I have a spare one from the Greek guy £30 delivered
says tm carbs - dunno if tmx is ok?
bulk order would save postage
cant find a link to the greek chap i bought mine from
found it
- jimmo
- registered user
- Posts: 67
- Joined: Sun Apr 12, 2009 10:35 pm
- Main scooter: Lambretta GP TS1 230 JB
- Location: Chertsey - Surrey
- Contact:
Just bought one on ebay from a seller in the US for 20 bucks and a bit of postage.
I want to fit one to my tmx 35 as when JB built the engine he did say and the dyno showed that it does run a bit lean above 7k and as it makes its peak power at 8600 i want it right.
A few of us have organised a day at Rogers @ Pro Porting next month so that will tell if any improvement is made.
Touch wood!!
I want to fit one to my tmx 35 as when JB built the engine he did say and the dyno showed that it does run a bit lean above 7k and as it makes its peak power at 8600 i want it right.
A few of us have organised a day at Rogers @ Pro Porting next month so that will tell if any improvement is made.
Touch wood!!
^ Ditto...from same guy. Got the link through a thread on this site originallyChutney Brownlove wrote:I bought one just in case, which has never been out of the bag