speedhut gps speedo
Is there anyone on here with a CNC/ lathe who can make me a ring for my headset please.........?
I don't want to keep up with modern traffic. I want to hoon past it, preferably on one wheel!
-
- registered user
- Posts: 436
- Joined: Sun Oct 17, 2010 5:31 pm
- Main scooter: lambretta ld auto
- Contact:
Looks nice Mark
Dean
It will work Martin. Have faith
Where are you sticking the magnetic sender mark?
I don't want to keep up with modern traffic. I want to hoon past it, preferably on one wheel!
Under the horn cast initially
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Like the levers Mark, whats the story with them?WINTERMODEL150 wrote:Looks nice Mark
Dean
ta
Not my bike sef but it is fully hydraulic
Update on this setup.
It seems to pick up satellites perfectly, I have fitted the sensor under horncast and wired the hot start connection into the loom before ignition so it gets a permanent feed to track satellites , turn ignition on and it runs thru the speedo start up procedure( 20-30seconds) and is ready to go by time you started bike. Hopefully road test next week
It seems to pick up satellites perfectly, I have fitted the sensor under horncast and wired the hot start connection into the loom before ignition so it gets a permanent feed to track satellites , turn ignition on and it runs thru the speedo start up procedure( 20-30seconds) and is ready to go by time you started bike. Hopefully road test next week