Cheers for the reply ron, I'll have a play around with it. Hopefully I can find a good set up using the 266.
It's a fantastic kit, I absolutely love riding it. Hopefully I won't bugger it up
Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test.....
-
- registered user
- Posts: 50
- Joined: Tue Sep 18, 2012 7:35 pm
- Main scooter: Jet200
- Location: East Grinstead
- Contact:
Just had a tear up with a mate on the country lannes on my Avanti and it seem to be running rather well.. The top speed GPS was 82.9 which is 7mph faster at that spot than when running 4.6 gearing... I'm pretty chuffed considering this is a off the shelf barrel:-)
Hi Rick,
What gearing you got now?
What gearing you got now?
-
- registered user
- Posts: 1292
- Joined: Sun Dec 04, 2011 7:43 pm
- Main scooter: Li Avanti 225
- Location: York
- Contact:
What carb and exhaust is fitted ?Rick wrote:Just had a tear up with a mate on the country lannes on my Avanti and it seem to be running rather well.. The top speed GPS was 82.9 which is 7mph faster at that spot than when running 4.6 gearing... I'm pretty chuffed considering this is a off the shelf barrel:-)
Had 80 mph + with the 35 TMX Mikuni and Franspeed Race with 4:8.1 gearing
That's impressive
-
- registered user
- Posts: 50
- Joined: Tue Sep 18, 2012 7:35 pm
- Main scooter: Jet200
- Location: East Grinstead
- Contact:
The speed was tacken with a phone app so it could be wrong but the distance was spot on. My mate was on a 25bhp+ TS1 and I don't think he was gonna catch up My bike puts out about 21bhp or did....
As Adam would say, all the parts of an engine working together.
a pipe is only as good as the gearing you run with it and visa versa.
a pipe is only as good as the gearing you run with it and visa versa.
Hi mick1mick1 wrote:What carb and exhaust is fitted ?Rick wrote:Just had a tear up with a mate on the country lannes on my Avanti and it seem to be running rather well.. The top speed GPS was 82.9 which is 7mph faster at that spot than when running 4.6 gearing... I'm pretty chuffed considering this is a off the shelf barrel:-)
Had 80 mph + with the 35 TMX Mikuni and Franspeed Race with 4:8.1 gearing
What jetting do you have? Apologies if you have already posted in this super long thread.
I'm considering blowing the cobwebs off mine and trying a TMX35
Thx
11111111 = 0xFF
-
- registered user
- Posts: 1292
- Joined: Sun Dec 04, 2011 7:43 pm
- Main scooter: Li Avanti 225
- Location: York
- Contact:
CANbus:
25 PJ
57 needle (not sure which clip but think top ?)
290 MJ
Breathsweet filter
The Mikuni makes a massive difference to the 30mm PHBH that was on, more responsive and more top end, completely transformed the performance.
been on 2 x dynos. One got 22.8 hp the other was 21.7 hp. The lower one was a freebie at the York SC do and he only took it to 7k rev's (I've had to 7.5k on the road)
25 PJ
57 needle (not sure which clip but think top ?)
290 MJ
Breathsweet filter
The Mikuni makes a massive difference to the 30mm PHBH that was on, more responsive and more top end, completely transformed the performance.
been on 2 x dynos. One got 22.8 hp the other was 21.7 hp. The lower one was a freebie at the York SC do and he only took it to 7k rev's (I've had to 7.5k on the road)