Dog Leg Clutch Lever

[twenty eight]

yam rd 250/350 lever ...bit of fettling to fit mind

i have the same lever on my gp 6 plate clutch works a treat,20 mins with the dremmel

[corrado]

I've got some Saigon Yam ones too but they need fettling to match the housing.

[Tom Russell]

MB now do their own version which fits without fettling, and work a treat

http://www.lambrettaspares.com/spares/h ... 0696k.html

Cheers.

That's good news, as my clutch always seemed to drag - regardless of whatever I did to clutch internals etc. - a bit on my old road scoot with the modified RD lever

[Beanhead]

use the remade MB one on mine,with the friction free cable, sorted my clutch problems right out!

[ferritt]

I ended up with a remade rd350 lever from ebay for £3.50, modified the housing to suit, mb nylon clutch cable, problem seems solved

[Andy Pickering]

I've got some Saigon Yam ones too but they need fettling to match the housing.

Just by way of feedback to the forum, As my scooter is at Seans I asked Sean to fit one of these levers whilst replacing the clutch in readiness for the avanti, I popped into the garage briefly whilst in the area on business and can confirm its a very nice bit of kit (the lever) and gives a very light clutch operation...there was a member asking about easier options on clutch leverage due to arithritis maybe this could be an alternative to him..or others

As always top man service from Martin (Corrado)

[Lamaddict]

I ended up with a remade rd350 lever from ebay for £3.50, modified the housing to suit, mb nylon clutch cable, problem seems solved

Ditto on that just got one off ebay £6.50 inc the postage. I'm guessing 10 mins with a file to make it fit to the Lamy housing.

[ForemanBob]

If you're struggling with a heavy clutch, you could try one of these....

http://www.grandprixmx.co.uk/khxc/index ... easyclutch

[TED CRUD]

http://www.venhill.co.uk/Magura_Control ... RSION.html