Super Monza for charity - child cancer research
- Powolotti
- Dealer
- Posts: 103
- Joined: Wed Jan 07, 2009 2:53 pm
- Location: 40 miles north of Vienna
- Contact:
----
Last edited by Powolotti on Sun Feb 26, 2012 10:41 pm, edited 1 time in total.
meet me on Facebook: Michael Powolotti
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
good idea
although if the bolt turns so do the cones
although if the bolt turns so do the cones
Its in bits scooter club: www.facebook.com/groups/132415046859320
- Powolotti
- Dealer
- Posts: 103
- Joined: Wed Jan 07, 2009 2:53 pm
- Location: 40 miles north of Vienna
- Contact:
that just happens if you loose your..ahem..the bolts nuts
meet me on Facebook: Michael Powolotti
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
- Powolotti
- Dealer
- Posts: 103
- Joined: Wed Jan 07, 2009 2:53 pm
- Location: 40 miles north of Vienna
- Contact:
got the big parcel today just in time to put a dummy engine together for this saturday´s Ried Custom Show. We will have a stall where the engine is shown, after the show the rebuild will begin. Fitted a 38 PWM carb just to know if there are problems with fitment, but this should be fine also with engine mounts and in the frame - but all details later.
meet me on Facebook: Michael Powolotti
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
cool stuff
btw .. i have never quite under stood why no one has made an engine bolt with a fixed hex on one end ???
btw .. i have never quite under stood why no one has made an engine bolt with a fixed hex on one end ???
Powolotti wrote:
Its in bits scooter club: www.facebook.com/groups/132415046859320
- Powolotti
- Dealer
- Posts: 103
- Joined: Wed Jan 07, 2009 2:53 pm
- Location: 40 miles north of Vienna
- Contact:
-----
Last edited by Powolotti on Sun Feb 26, 2012 10:42 pm, edited 1 time in total.
meet me on Facebook: Michael Powolotti
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
i know why its done .. as with out a mega ton forge to knock a hex head on there you would have to lathe down a s**t load of hex stock ..
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
- registered user
- Posts: 231
- Joined: Sat May 09, 2009 2:31 pm
- Contact:
hi powolotti can you tell what exhaust you are using thanks Steve
- Powolotti
- Dealer
- Posts: 103
- Joined: Wed Jan 07, 2009 2:53 pm
- Location: 40 miles north of Vienna
- Contact:
Hi Steve, exhaust is the latest italian version
meet me on Facebook: Michael Powolotti
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at
some of my tuning work:
http://www.facebook.com/pages/Powolotti ... 6938811863
my club:
http://www.wiener-spitzbuam.at