Re notching wire rings

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
davidblythe
registered user
Posts: 298
Joined: Wed Jan 07, 2009 7:19 pm
Location: Cheam, Surrey
Contact:

as it seems very difficult to find someone to repeg a piston, want to re notch the rings instead

what is the best way to do this as dont want to overdo the notch, file, air grinder ?
jimmers
registered user
Posts: 86
Joined: Sat Jan 10, 2009 8:01 pm
Contact:

needle file would have thought as first go

how come you cant repeg yourself?
davidblythe
registered user
Posts: 298
Joined: Wed Jan 07, 2009 7:19 pm
Location: Cheam, Surrey
Contact:

give me another 2 years and i may attempt it

seems one of those jobs people dont like to do
Knowledge
Dealer
Posts: 957
Joined: Sun Jan 11, 2009 12:49 am
Main scooter: GP
Location: Ipswich
Contact:

Don't leave any sharp edges in your cut-out, otherwise you may have stress fractures. Otherwise, I think it is a sound alternative to re-pegging. Opinions differ.
Martin
User avatar
tony
registered user
Posts: 755
Joined: Wed Jan 07, 2009 1:18 pm
Main scooter: 90ss
Contact:

Imo i'd find another piston. What port is the peg running through btw?
Sponsors: Performance Tuning. Ve Uk. Scooter Center Koln. LTH . DRT
davidblythe
registered user
Posts: 298
Joined: Wed Jan 07, 2009 7:19 pm
Location: Cheam, Surrey
Contact:

boost port,

all the jap pistons seem to run the 2 ring pegs fairly close together

wire 1mm rings

the rings are 3mm wide, and the peg are a 1mm deep the flexibilty in the rings hopefully will take the notching

or alternatively will get the barrels rewelded and need boost ports cut in

or will just run the top ring only (RB has been like this for the last 1000 miles)
User avatar
mawso
registered user
Posts: 411
Joined: Wed Jan 07, 2009 8:47 pm
Location: Harrogate
Contact:

Sorry I don't mean to jump this thread...but regarding running on one ring. I have 65.5mm Wiseco Suzuki piston, which I just spent the last 15 mins trying to find (no joy). One of the pegs, can't remember which now, has sunk or worn away. Presuming it's the bottom ring; will I be able to run on just the top alone?

I'm well pissed off with it really as the motor had only done 700 miles with after a rebore with this new piston and then this with ring peg!

Back on topic...who would be willing to repeg it if it's not possible to run on a single ring? I aren't gonna hold anyone responsible for a warranty on it or anything!

Not even the shop who sold me the piston in the first place would help "Mr Wiseco didn't make them to be adapted for Lambrettas you know"
YAMLAM
registered user
Posts: 1073
Joined: Mon Jan 12, 2009 10:41 pm
Contact:

i dont know if they do it themselves but i have had two DT175 yam pistons repegged by Taffspeed.
win or lose have a booze
User avatar
Adspeed
registered user
Posts: 297
Joined: Thu Jan 08, 2009 6:46 pm
Contact:

My Wiseco TS setup.......Its been fine for years now.

Image
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 25 guests