TS1 Ron Moss Ts1

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
shedboy
registered user
Posts: 6
Joined: Mon Apr 06, 2009 10:23 pm
Contact:

Sun Jun 05, 2011 7:06 pm

Hi guys

Is any one ruining a Ts1 with a Ron Moss clubman what gear box are you using.I have li 150 17x46 giving me 4.6 but it is hard work in 4th all right on the strait but struggles into wind ore up hill i am not a small lad 17stone any help would be great
thanks shedboy

bsso78
registered user
Posts: 255
Joined: Mon Jan 12, 2009 10:58 pm
Location: Darlington
Contact:

Sun Jun 05, 2011 7:14 pm

"Ruining" a TS1 with a Clubman? :lol: :lol:

Sorry mate couldnt resist that one :D

davidblythe
registered user
Posts: 299
Joined: Wed Jan 07, 2009 7:19 pm
Location: Cheam, Surrey
Contact:

Sun Jun 05, 2011 7:36 pm

do a straight swap with a LI 125 box to give a ratio of 5.00 on the same sprockets

friend runs the same set up and it does 80mph gps speed

Chris CSPE
Dealer
Posts: 164
Joined: Mon Sep 14, 2009 8:38 pm
Contact:

Sun Jun 05, 2011 7:44 pm

Look in the 'Dyno graph posting area' there's one there.

User avatar
Muttley McLadd
registered user
Posts: 2549
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Sun Jun 05, 2011 10:19 pm

A few salads would be cheaper than anything else ;)

Is the barrel untouched? A few hours in the hands of an adult with a dremmel would liberate enough power to pull that gearing.
CakeAndArseParty

tha83
registered user
Posts: 150
Joined: Fri Jan 16, 2009 5:41 pm
ebay user ID: tha83
Main scooter: SX 2something
Location: Left Coast USA
Contact:

Sun Jun 05, 2011 10:39 pm

Muttley McLadd wrote:A few salads would be cheaper than anything else ;)

Is the barrel untouched? A few hours in the hands of an adult with a dremmel would liberate enough power to pull that gearing.
I always thought a dremel would be undermatched to the nicasil lining, no? I've used a dremel for case porting and intakes but shy away from the hard stuff.

User avatar
Muttley McLadd
registered user
Posts: 2549
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Mon Jun 06, 2011 12:50 am

tha83 wrote:
I always thought a dremel would be undermatched to the nicasil lining, no? I've used a dremel for case porting and intakes but shy away from the hard stuff.
Or the professional equivalent. I've not got mine together yet.. but it was fettled by an adult for a couple of days (mild porting). I'm expecting it to pull 4.6 (or higher) with my clubman on, two up. My previous one pulled it, two up, with a DJ pipe on - and that was a similar tune and a chubby lass.
CakeAndArseParty

willwander
registered user
Posts: 201
Joined: Thu May 20, 2010 10:12 am
Contact:

Mon Jun 06, 2011 11:37 am

bsso78 wrote:"Ruining" a TS1 with a Clubman? :lol: :lol:

Sorry mate couldnt resist that one :D
grin :lol:
standing mile: 118.6mph
1/4 mile: 14.04 seconds - 93mph

User avatar
Diablo
Dealer
Posts: 707
Joined: Wed Jan 07, 2009 12:24 pm
Location: Nuneaton
Contact:

Mon Jun 06, 2011 11:52 am

Yeah have a look in the dyno posts and you'll find Doms TS1. He pulls 4.8 with that and is very happy with it.
I rode it and thought that it was great but wouldn't pull taller than that.
The thing to remember is that the Ron Moss pipes just rev on and on so in my view I think the earlier suggestion of running final drive of 5.0 is good.
BTW I've seen a lot of TS1s on the dyno with expansions on that made less power.

mickdale
registered user
Posts: 549
Joined: Tue Aug 04, 2009 8:40 pm
Contact:

Mon Jun 06, 2011 3:40 pm

shedboy wrote:Hi guys

Is any one ruining a Ts1 with a Ron Moss clubman what gear box are you using.I have li 150 17x46 giving me 4.6 but it is hard work in 4th all right on the strait but struggles into wind ore up hill i am not a small lad 17stone any help would be great
thanks shedboy
yes m8
got 60mm crank and 1.5mm machined from the base

runs i ndian gp with 20/47 (4.7) no worries

Post Reply Previous topicNext topic
  • Information