stator breakdown

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
FREAK
registered user
Posts: 58
Joined: Tue Feb 15, 2011 1:02 pm
Main scooter: Rb225 GP LAMBRETTA
Location: gomersal
Contact:

ime running a rb 225 (tweeked) with an af light flywheel and a 120 watt bmg stator , no probs at all, as per previous post modded mag houseing
User avatar
JOHNNY
registered user
Posts: 38
Joined: Wed Jan 07, 2009 6:30 pm
Main scooter: Full carbon fibre RB270 gp
Contact:

Thanks for the help and having another head to bounce the problem off Sean , the problems still there though , Wayne spoken to dan about the jetting and it's abit out main and slide are ok but needle , clip position , pilot and mixture are incorrect so that's going to be the next port of call , was thinking of flinging Zoes 32 mm mikuni on will swap main over though first and eliminate if it's a goosed carb
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

just dont start swapping carbs etc for now jonny ,just get it in for a dyno sort out asap
Sean Brady Scooters - 01765 690 698
User avatar
JOHNNY
registered user
Posts: 38
Joined: Wed Jan 07, 2009 6:30 pm
Main scooter: Full carbon fibre RB270 gp
Contact:

Ok
User avatar
JOHNNY
registered user
Posts: 38
Joined: Wed Jan 07, 2009 6:30 pm
Main scooter: Full carbon fibre RB270 gp
Contact:

Finally got it running at long last ! Just afew final tweaks tomorrow on the dyno and all shall be well , thanks to everybody who's posted suggestions think we tried them all and more cheers guys
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 69 guests