Bit of a rush job really empty the boxes of bits ,paint them replace a few bits then build,then hit a few hurdels ,mot,then register then scarborough well that was the plan .
Did we say spanish leggies series 2 DONT have those captive areas ?
Series 1/2 front mudguard fitment
i have a solution
have a counter sink bolt under the runner nearest the fixing on the inside of guard
and runn a bracket with a nut weled to it in the required poistion ....do you follow ???
have a counter sink bolt under the runner nearest the fixing on the inside of guard
and runn a bracket with a nut weled to it in the required poistion ....do you follow ???
Its in bits scooter club: www.facebook.com/groups/132415046859320
yes ...as the eibar series 2 has a turning mudguard they dont need themMAB wrote:Bit of a rush job really empty the boxes of bits ,paint them replace a few bits then build,then hit a few hurdels ,mot,then register then scarborough well that was the plan .
Did we say Spanish leggies series 2 DONT have those captive areas ?
Its in bits scooter club: www.facebook.com/groups/132415046859320
Now that sounds like a plan , i will give it a go tomorrow night and keep you posted thanks for all your help its really appreciated.
Mark
Mark
I take paypal
Its in bits scooter club: www.facebook.com/groups/132415046859320
What a service Ricspeed thats spot on thanks again mate your a star .
Forever grateful
Mark
Forever grateful
Mark
you will need to pull counter sink bolt through to form a flare in the pannel work(like gp leggies) and use a bit of tube to space it out
Its in bits scooter club: www.facebook.com/groups/132415046859320