classic rapido with 60mm crank & clubman charecteristics

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
mickdale
registered user
Posts: 473
Joined: Tue Aug 04, 2009 8:40 pm
Contact:

anyone got a dyno for a classic rapido 200 (or 225 if they do classic) with a 60mm crank and clubman?

can you get large block casa kits?

cheers
mick
User avatar
TS1-200
registered user
Posts: 297
Joined: Thu Jan 08, 2009 1:19 am
Contact:

Yes casa do a 210 kit for 200 casings. similar to the 185 kit but bigger.
Keep on keepin on
goldeneye
registered user
Posts: 1037
Joined: Wed Apr 01, 2009 2:28 pm
Contact:

go rapido! cheaper, re-bore-able, pulls well. the classic 225, 28 or 30mm dellorto, and 42 clubman is an ideal rally set up, pulling GP20019x46 . will easily pull 20 tooth front . if i had a small block lammy, (i was after a series 1 150 earlier this year) i would consider the CASA, but the reports of how good the Mugello 186 is, i would choose that over any small block kit. bite the bullet. although........... :D
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 21 guests