Anti dive question again
-
red ghost
- registered user
- Posts: 545
- Joined: Wed Jan 07, 2009 7:46 pm
- Xbox live gamer tag: Pleasure Master
- Main scooter: lambretta gp150
- Location: Gold Coast Queensland Australia
- Contact:
Looks like what Frautzi did..
How come phonetics isn't spelt with an 'f'?
Check out my boobs! <-- <--Just imagine being burried between those puppies!
Check out my boobs! <-- <--Just imagine being burried between those puppies!
-
scootRS.com
- Dealer
- Posts: 141
- Joined: Wed Jan 07, 2009 4:20 am
- Contact:
Probably. Don't know the name but if you mean the tie bar, a few people have done the same it seems. Frank's disc does the same too looking at the photos just above.
I was thinking the same thing .... i had mine lazer cut with bearings and oil rings to prevent dirt getting in the bearings. I had 20 cut just need to get them polished and i'll sell the restred ghost wrote:Looks like what Frautzi did..
Did this back in september... so its not new it just an upgrad of a poorly thought out design.
Better to keep quiet and be thought of as a D!ck Head, than to open your mouth and remove all doubt.
-
joespeed
- registered user
- Posts: 740
- Joined: Wed Jan 07, 2009 10:57 am
- Location: drax,near selby,north yorkshire
- Contact:
Frautzi wrote:I was thinking the same thing .... i had mine lazer cut with bearings and oil rings to prevent dirt getting in the bearings. I had 20 cut just need to get them polished and i'll sell the restred ghost wrote:Looks like what Frautzi did..
Did this back in september... so its not new it just an upgrad of a poorly thought out design.
thats the easy bit,what about the caliper carrier that has the bearing in?
regards
joe
Hear what your saying mate but i did these for me and a few others. I'm no way trying to enter the lambretta upgrades market.joespeed wrote:Frautzi wrote:red ghost wrote:Looks like what Frautzi did..
thats the easy bit,what about the caliper carrier that has the bearing in?
regards
joe
I'm sure scootrs will sort the caliper carrier out too
....Better to keep quiet and be thought of as a D!ck Head, than to open your mouth and remove all doubt.
-
scootRS.com
- Dealer
- Posts: 141
- Joined: Wed Jan 07, 2009 4:20 am
- Contact:
As mentioned above, already done in the photo shownFrautzi wrote:I'm sure scootrs will sort the caliper carrier out too
These are incremental changes though, we don't want anyone to spend lot of money thinking it will make much difference over the current version. It's not going to stop any better.
-
red ghost
- registered user
- Posts: 545
- Joined: Wed Jan 07, 2009 7:46 pm
- Xbox live gamer tag: Pleasure Master
- Main scooter: lambretta gp150
- Location: Gold Coast Queensland Australia
- Contact:
Well, done diddley done!, all nicely fitted up, spin 'round the block and all sweet!
Still needs some tinkering, might rework the tie bar..
Big ups to those who helped out, namely Mark
Damper moved for clarity..
Still needs some tinkering, might rework the tie bar..
Big ups to those who helped out, namely Mark
Damper moved for clarity..
How come phonetics isn't spelt with an 'f'?
Check out my boobs! <-- <--Just imagine being burried between those puppies!
Check out my boobs! <-- <--Just imagine being burried between those puppies!
Looks the bollix mate
-
corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
I'm sure you've checked but does the shocker clear the axle dome nut under full compression. Looks awfully close looking at the pics.
Nice to see some quality workmanship though.
Nice to see some quality workmanship though.