As shown here on the Beedspeed site.
http://beedspeed.com/product_info.php?c ... ts_id=8533
Good? Shite? Who makes it?
Familiar with this disk brake?
-
- registered user
- Posts: 36
- Joined: Sat May 16, 2009 2:28 am
- Location: Portland, Oregon, USA
- Contact:
Dave
Lucky b@5t@rds SC, Portland, Oregon, USA
Lambretta Club USA
Lucky b@5t@rds SC, Portland, Oregon, USA
Lambretta Club USA
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Looks like the ScootRS one. Do yourself a favour and make sure you buy ScootRS if you want this type of brake, I believe Beedspeed sell them as does Corrado
Turn On, Tune In, Cop out!
just bin the shite rubber hose
Its in bits scooter club: www.facebook.com/groups/132415046859320
thought beedspeed sold spaq,buy from corrado to be safe
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Ye just pulled mine out the box..(really gotta fit the fecker)..lol, and its the same as my scootrs one but with braided hose and mines anti dive, main thing issoulsurfer wrote:Looks like the ScootRS one
..Nissin Brake Components
Ricspeed, gone but never forgotten RIP my friend #59
- Speed Demon
- Dealer
- Posts: 392
- Joined: Mon Feb 02, 2009 12:09 pm
- Contact:
If it is from Beedspeed then it is unlikely to be a ScootRS one because I believe they fell out (can't imagine how that might happen ) and is probably from A.N.Other Viet source.
ScootRS ones - I believe - are now only supplied with genuine Nissin master cyl and calipers. Not sure if the same applies to the other manufacturers. There have been some failure problems with replica master cyl and calipers so prob best to stick with someone who supplies Nissin.
ScootRS ones - I believe - are now only supplied with genuine Nissin master cyl and calipers. Not sure if the same applies to the other manufacturers. There have been some failure problems with replica master cyl and calipers so prob best to stick with someone who supplies Nissin.
Get to SULK
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
MEEEEEEEEEEEOOOOOOOW..lol..Speed Demon wrote:can't imagine how that might happen
Ricspeed, gone but never forgotten RIP my friend #59
- corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
That's a Sterling version. Scootrs has a double cut out on the caliper mounting bracket that the drum hub stub seats into making the hub sit more central. As far as I know it's a unique feature on the scootrs one. Scootrs also come with polished lever and s/s hose (which I'd still swap for a Hel one from Chiggy) and the latest ones have the Innocenti "I" cut into the caliper mounting plate....... and it may have been mentioned but scootrs are not sand cast.DaveInPortland wrote:
Who makes it?