variatronic

[RAP 200]

Darren here from the Lambretta club of South Australia,is it possible to remove the thick steel ring around the variatronic flywheel ,just wondered if anybody has done this.

[tarmac tickler]

no it is not, it is one complete peice, i had to replace mine with a indian one when the recess for the woodruf key split,, drilled all the rivets and it came out in one big lump,,, daz

[wezly]

charlie edmonds removed the weight band on one of mine when he welded the rivets,

[RAP 200]

Is this just a press fit, or could i cut through it to get it off

[Diablo]

Charlie told me they can be removed as well. If your careful with a dremmel type cutting tool you shouldn't have any problems

[tony]

Removable.

[sion]

is this the weight weare talking about around the out side
i thought about machineing it down a bit?

[fullmetaldany]

yes but when you work on it always check the balance of it !!
iow how higher the revs the better balance you need!!!
good luck
fmd

[sion]

wot about the lighting coils can they be removed

[corrado]

The "a" in variatronic can be removed, then it'll be varitronic.

Bit like my mate that always says "M and B" for MB.