rear brake
What oclock dose the rear brake arm have to be ,as my cable clamp is right in the shock casing and not twisting the brake cam before it hits the casing,sorry for being dense!!
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
move the arm back a couple of splines then..
Sean Brady Scooters - 01765 690 698
and top tip , use one of knowledges cables.........
thanks,nearly finished,then i can show what you lot helped build.
- coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
The greatest leverage is when the brake arm is at 90 degrees to the cable. Make sure that when your brake is hard on it's as close to a right angle to the cable as possible and definatwely not more as you will loose efficiency
-
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
Time for new brake shoes?
That's not going anywhere...