Need electrical help - connecting S2 loom to electronic kit

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
jimmac
registered user
Posts: 10
Joined: Thu Nov 26, 2009 6:43 pm
Contact:

Sun May 16, 2010 1:14 am

I'm using a BGM stator, Ducati HT coil and Ducati Regulator. The loom is new, 2-wire brake type.

Wires from stator:

Green
Yellow
White
Red

Wires from loom:

Grey
Purple
Green (two into one connector)
Wire to coil


I'm thinking I can put the double green wire straight to the CDI, but I don't know where to attach the Grey and Purple wires. Anyone done this before?

plantman
registered user
Posts: 11
Joined: Wed Feb 10, 2010 2:51 pm
Contact:

Sun May 16, 2010 5:06 pm

ive done it once mate,but best to refer to sticky book really.red is pick up and white is earth i think /green cut out,sticky book is good all manner of wiring types in there

User avatar
wack 63
registered user
Posts: 1527
Joined: Fri Nov 27, 2009 9:33 pm
Main scooter: '71 GP TS1
Location: Lincs
Contact:

Sun May 16, 2010 5:08 pm

Hi,I would say the grey and purple need to be joined together to feed the lights either into a single spade to plug into the regulator or in joined terminals in the junction box. The double green is the ignition, one end goes to the headset and the other is the loose green which plugs into the CDI outside green terminal to act as the cut out. So basically its all one green wire with a bullet to loop in n out the junction box. Hope this helps

jimmac
registered user
Posts: 10
Joined: Thu Nov 26, 2009 6:43 pm
Contact:

Sun May 16, 2010 11:56 pm

Thanks guys - Sticky's doesn't seem to cover this set up , as far as I can tell, although there are some kind of similar options.

I'll try the suggestions, and hopefully that will work.

plantman
registered user
Posts: 11
Joined: Wed Feb 10, 2010 2:51 pm
Contact:

Mon May 17, 2010 8:37 pm

did you sort it mate\?

jimmac
registered user
Posts: 10
Joined: Thu Nov 26, 2009 6:43 pm
Contact:

Tue May 18, 2010 2:39 am

Not yet - I've got a mate coming over to help me at the weekend, and he's good with electrics. I'll post the solution on here once we get it working, for anyone with a similar set up.

Post Reply Previous topicNext topic
  • Information