Page 1 of 1
inboard disc clanking at low speed
Posted: Mon May 10, 2010 3:11 pm
by goffy
put my inboard disc back together after painting and i'm getting a horrible clanking sound at low speeds. didn't do it before. It hasn't got a anti rattle clip in but can't remember seeing one when stripping it .
every thing has been put back together ok, could the lack of anti rattle clip be causing this noise, maybe it fell out when i stripped it without me noticing, that maybe why it didn't clank before, but also its supposed to brake better without the clip in according to sticky's book.
Any thoughts or experiences anybody on this one?
cheers.
Re: inboard disc clanking at low speed
Posted: Mon May 10, 2010 3:25 pm
by RinB
Before stripping it it my have been gunked up and so stripping may have freed it off.
They do rattle
Re: inboard disc clanking at low speed
Posted: Mon May 10, 2010 3:45 pm
by Chris F
Both of my inboards have clanked around at slow speeds. It's kind of odd, but I suspect it's the nature of a floating disc. Or... I've put up with two poorly built hubs....
Re: inboard disc clanking at low speed
Posted: Mon May 10, 2010 8:18 pm
by minotaur
my evergreen inboard is quiet without anti rattle and my original rattles with anti rattle? 'orrible noise
Re: inboard disc clanking at low speed
Posted: Mon May 10, 2010 11:44 pm
by RICSPEED
It's normal even if it's annoying
Re: inboard disc clanking at low speed
Posted: Wed May 12, 2010 6:11 am
by scoothappy
i see some discs holes drilled out which makes them rattle more. but mine aren't drilled and with the clips in don't rattle at all.
Re: inboard disc clanking at low speed
Posted: Wed May 12, 2010 12:19 pm
by MAB
Does anyone know who sells the anti rattle clips ive tried all over the place.
MAB,
Re: inboard disc clanking at low speed
Posted: Wed May 12, 2010 2:40 pm
by minotaur
scooter restorations, 2.50 quid
Re: inboard disc clanking at low speed
Posted: Thu May 13, 2010 9:05 pm
by MAB
Thanks for that
MAB