6005 double sealed bearing
Sent from my iPhone using Tapatalk
Mb rear bearings
________________________
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
-
- registered user
- Posts: 388
- Joined: Tue Dec 20, 2016 2:27 pm
- Location: Switzerland
- Contact:
Will take the circlip out tomorrow and check but a replacement nachi skf ina bearing should be quite cheap. And wouldn't take long to replace if not happy with the standard item. Needs heating though as it has bearing retailing compound applied.garry inglis wrote:That looks good fluff do you no who is making the actual bearing I think I heard of this last year first picture though thanks
Sent from my SM-A320FL using Tapatalk
One question is if you bang on the bearing. Will it take the seat with it?
Skickat från min F3311 via Tapatalk
Skickat från min F3311 via Tapatalk
________________________
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Hi strummer10 I had it dynod last week at scooterotica and it finished up with 135 main 55 pilot small one without emulsion u16 on second clip dp266 atomized it pushed out 25hp and 20fbt
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
-
- registered user
- Posts: 388
- Joined: Tue Dec 20, 2016 2:27 pm
- Location: Switzerland
- Contact:
Depends what temperature retaining compound you use and if you try smash it out or use a bearing puller. Smash then maybe, puller no.
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Here's the print out Dan actually got it to 26 up and 21 debt but after final jetting 25hp and 20fbt
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Sent from my SM-A320FL using Tapatalk
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
How's that bearing working out fluff
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
-
- registered user
- Posts: 388
- Joined: Tue Dec 20, 2016 2:27 pm
- Location: Switzerland
- Contact:
I'm back in the workshop in 2 or 3 days.. had to fly away so will see what comes supplied as standard. Hi from NY though
-
- registered user
- Posts: 388
- Joined: Tue Dec 20, 2016 2:27 pm
- Location: Switzerland
- Contact:
Forgot all about this. . Took the clip out and standard is an SKF 6005-2RSH