GP LEGSHEILD FUEL TANK

General scooter chat, any scooter related non technical info.
shamrockexpress
registered user
Posts: 382
Joined: Mon Sep 28, 2009 12:44 am
Contact:

Fri Nov 25, 2016 1:20 am

Has anyone ever made the legsheild toolbox on a Lambretta GP (maybe metal PX style) into a petrol tank?
Or is it possible to buy such a thing, i can't see any drawbacks only positive things like weight forward, larger tank, easy to get at for refilling and lots of room under the panels for setting up carbs etc....

User avatar
Knowledge
Dealer
Posts: 1116
Joined: Sun Jan 11, 2009 12:49 am
ebay user ID: knowledge62
Main scooter: GP
Location: Ipswich
Contact:

Fri Nov 25, 2016 7:53 am

It certainly has been done. In fact, it can be essential if you have fitted a huge motorcycle engine beneath the panels.

My concern would be vibration. I like to rubber mount my (under panel) one-off tanks. This might be an issue when you are connecting a fuel tank to what is effectively a sheet of mild steel. You also need to consider how to accommodate the lower horncast bolts

I would imagine that all such tanks that have been made are not-offs, and it would not be possible to purchase one off the shelf. Perhaps there is a commercial opportunity for you. How good is your welding?
Martin

holty
registered user
Posts: 865
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Fri Nov 25, 2016 9:21 am

i considered one of these when i built my bike engined gp, but i opted for a tank under the frame loop as i needed the legshield toolbox as i have no other storage space, at the time beedspeed were selling them, and im sure ive seen them for sale by one of the vietnam companies, i did see one in use this year, it was on a self built lambretta with i belive a gilera water cooled barrel fitted, it was converted to crankcase induction and was using a tillotson carb which was using some of the space when the fuel tank would normally be, a very good job.

shamrockexpress
registered user
Posts: 382
Joined: Mon Sep 28, 2009 12:44 am
Contact:

Sat Nov 26, 2016 1:49 am

Thank for the replies, as said i would have two reasons,,,,,weight distribution and room beneath the panels for carb.........

gaz_powell
registered user
Posts: 1214
Joined: Sat Mar 28, 2009 1:10 pm
Location: hartlepool
Contact:

Sun Nov 27, 2016 7:40 pm

Saigon scooters used to do them

Mr G in NYC
registered user
Posts: 336
Joined: Fri Jan 22, 2010 7:54 pm
Main scooter: SX200
Location: NYC. LONDON
Contact:

Sun Nov 27, 2016 10:34 pm

I use a Rotax one gallon petrol container which can be used
behind the leg shield and can quickly be taken off and used
on another scooter if required . Great piece of Kit and very
handy when touring on a standard tank . G

Image

warts
registered user
Posts: 6888
Joined: Thu Aug 04, 2011 6:28 am
Main scooter: honda
Location: Fenland
Contact:

Mon Nov 28, 2016 11:00 am


tonydevon
registered user
Posts: 779
Joined: Wed Jun 08, 2011 12:26 pm
ebay user ID: tony-ac-racing
Main scooter: '71 GP125
Location: Northam, Devonshire
Contact:

Mon Nov 28, 2016 1:49 pm

my Lamgiva ran one, leaked like a friggin sieve when I bought it and the fuel tap had been hammered in LOL

if you get one then make sure and fully pressure test it first, I used POR15 and sealed it after welding on a new threaded boss for a fuel take off, I fitted a simple barb and then used inline fueltap
heavy is good, heavy is reliable, and if it does fail, hit them with it!!!

shamrockexpress
registered user
Posts: 382
Joined: Mon Sep 28, 2009 12:44 am
Contact:

Tue Nov 29, 2016 1:29 am

Sounds like a bit of hassle but i,m sure its worth it have you any pics???
thank

100mphlambrettaclub
Dealer
Posts: 120
Joined: Thu Jan 08, 2009 10:58 pm
ebay user ID: the100mphlambrettaclub
Contact:

Tue Nov 29, 2016 1:57 am

There is one main problem in doing this. The petrol pipe has to cover a much longer distance and so the flow rate is drastically reduced if the carburettor is drawing maximum fuel. This in turn can lead to seizure or holing the piston. Yes you could run a fuel pump but it starts to get a bit to complicated.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests