rb200 pm fat mamba
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
as above anybody useing a pm tuning fat mamba on rb200 as there are no nk exhausts at rayspeed
-
- registered user
- Posts: 908
- Joined: Wed Jul 15, 2015 11:52 pm
- Main scooter: lambretta gp
- Location: east yorkshire
- Contact:
hi garry,
yes ive got a fat mamba on my rb250, sounds very good, good overall performance, looks good, downpipe hard to fit, and the rubber washer that goes between the exhaust and the mounting is garbage, my exhaust would come lose all the time no matter if i used nylocks, studlock, or anything, fixed it in the end by enlarging the holes in the bracket and fitting scorpion exhaust rubber mounts, i also added an extra lug to the exhaust bracket and fitted another rubber mount, so its got 3 now and not a problem anymore, i have heard of these exhausts cracking, and splitting, but mine is fine, i would guess its down to the mounting issues, a solid mounted lammy exhaust will always break as im sure you know, i would buy another if i needed one.
holty
yes ive got a fat mamba on my rb250, sounds very good, good overall performance, looks good, downpipe hard to fit, and the rubber washer that goes between the exhaust and the mounting is garbage, my exhaust would come lose all the time no matter if i used nylocks, studlock, or anything, fixed it in the end by enlarging the holes in the bracket and fitting scorpion exhaust rubber mounts, i also added an extra lug to the exhaust bracket and fitted another rubber mount, so its got 3 now and not a problem anymore, i have heard of these exhausts cracking, and splitting, but mine is fine, i would guess its down to the mounting issues, a solid mounted lammy exhaust will always break as im sure you know, i would buy another if i needed one.
holty
Have you considered a chiselspeed exhaust,I had one on my RB20 sprinter.
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
yes their good i have an ads5 on my other scoot mambas are 3 to 4 week wait no nk for 4 weeks only leavs franspeed i have a super tourer with only 100 miles on it i might alter that
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
thanks holty if you can weld the beast iam sure i can alter an exhaust lollol
I've been using one of late having borrowed one off a mate. Pleasantly surprised with the strong mid range. I don't think the top end is as good as the Franspeed race that it replaced but it is fun!
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
is it rideable around town from the dyno ive seen it starts from 3000 revs is that right