Scooterotica

Posted: **Sat Apr 18, 2020 7:57 pm**

I have a 1960 LI150 Series 2, how do I know if it is a large or small cone crankshaft?

Posted: **Sat Apr 18, 2020 8:07 pm**

All li are small cone only gp is large cone or thicker taper

Sent from my SM-G960F using Tapatalk

Posted: **Sat Apr 18, 2020 8:09 pm**

garry inglis wrote: ↑Sat Apr 18, 2020 8:07 pm All li are small cone only gp is large cone or thicker taper

Sent from my SM-G960F using Tapatalk

Only problem is we don't know if anyone has changed the crank.

Have a look at this.

http://www.scooterrestorations.com/lamb ... mm-conrod/

Posted: **Sat Apr 18, 2020 8:31 pm**

I've got a couple of old li cranks and some new gp I'll measure the shaft in morning and let you no

Sent from my SM-G960F using Tapatalk

Posted: **Sat Apr 18, 2020 8:32 pm**

You could also measure the taper hole on the flywheel

Sent from my SM-G960F using Tapatalk

Posted: **Sun Apr 19, 2020 6:19 am**

I've had a measure 1st pic is new gp 2nd pic is li150 3rd pic is original Dansi gp

Sent from my SM-G960F using Tapatalk

Posted: **Sat May 02, 2020 7:10 pm**

where does the terminology small cone ,large cone come from ?
been playing with lammies since 1980 and only ever knew it as GP or Li taper .

Large or Small Cone