Mikuni TM28 jetting suggestions please

FREE tuning and maintenance info, plus links to our original tuning pages that started it all off.
User avatar
Pompeydave
registered user
Posts: 33
Joined: Thu Sep 20, 2012 1:16 am
Main scooter: 1970 GP125
Location: Portsmouth
Contact:

Hi all, I’ve got an Italian GP125 with GP200 gearing, a Casa 185 kit that has been bored out to 198, a BGM electronic ignition timed at 20 BTDC, a BGM big bore exhaust and a Mikuni TM28 carb. The carb is the new item. Can anyone suggest jetting, a needle and an atomiser please?
User avatar
Pompeydave
registered user
Posts: 33
Joined: Thu Sep 20, 2012 1:16 am
Main scooter: 1970 GP125
Location: Portsmouth
Contact:

By the way the cylinder set up is with the squish set at 1.5mm and the piston sits at 1mm above the bottom of the exhaust port at BDC.
User avatar
vegansydney
registered user
Posts: 223
Joined: Wed Jan 28, 2009 8:52 am
Location: New York City
Contact:

On a ‘Suzuki 190’ with K&N airfilter running via a dl/GP150/200 hose:

Main 190
Pilot 40
Needle 5D5 on 2nd clip
Atomizer 169-P0
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests