Vespa BGM MRB Clubman - 30.21hp

Post your Vespa dyno graphs here! But graphs & spec info only, keep the chat in the 'dyno chat' section ;o)
MattsDad
registered user
Posts: 78
Joined: Sat Jan 17, 2009 2:21 am
Contact:

Got pre release a few weeks ago from Mark, 30.21 last week as bolt on, some jetting changes tonight to suit the pipe as below.
Quality superb, double O rings and no leaks.
5 decibels down on an expansion at 4000 revs.
No problem now to fit centre stand on Veloce, Sprint etc.

Image
COCKSPEED TUNING
ricalnic
registered user
Posts: 156
Joined: Fri Jan 09, 2009 11:14 am
Main scooter: Lambretta GP Monza 225
Location: Livingston
Contact:

Smooth delivery, what spec motor is this on ?

Any pics of the exhaust available, would love to see back to back runs with std box, and JL, Taffy, or Simonini....
User avatar
Shaunbond
registered user
Posts: 161
Joined: Sun Feb 15, 2009 6:00 pm
Location: Preston, Lancs
Contact:

Says Malossi 210 fast road tune on the graph :D
Serial scooter rider...
VMSC Committed to Scootering for 25 years
MattsDad
registered user
Posts: 78
Joined: Sat Jan 17, 2009 2:21 am
Contact:

Sorry I don't really use or own standard pipes but hopefully will be doing an expansion comparison next week.
Its new engine build and not standard. Not welded, 57 stroke, Vespatronic, reed, centred head, and TM carb.
Its got packing options to make into a touring tune also so will graph that too.
Here's the torque which shows efficient bmep peaks so happy will that and more than surprised the pipe revs through this far:
Image
COCKSPEED TUNING
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

wrong graph tony ,
clubman revs high and produces good bottom and reasonable peak due to the dual effect of combining std and double tuned length with a tuned length of around 550 i guess, it will rev to the moon if the ignition and comp ratio lets it then 1100 its around the length of a low rev touring pipe
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
MattsDad
registered user
Posts: 78
Joined: Sat Jan 17, 2009 2:21 am
Contact:

Oops, sorry clicked the wrong one Darrell, had a glass of red with my tea!
Its very clever isn't it but was still surprised. Should be a good experiment to see how it does lower down, I know Scooter Center have had really good results on that kind of tune, so it looks like a versatile pipe. Booked it in for expansion test on Monday.

Image
COCKSPEED TUNING
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

If you've got one lying around, a comparison with a SIP road pipe would be useful.
CakeAndArseParty
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

good results,make a nice wolf in sheeps clothing scoot
whats the expansion,u going shootout?
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
MattsDad
registered user
Posts: 78
Joined: Sat Jan 17, 2009 2:21 am
Contact:

I don't have any shelf pipes I'm afraid but if you look on Mark's site the SIP comparison was the acid test and it blew it away if I remember, there should be some graphs.
Should be there Darrell but nothing serious as still working on another engine to beat Tony and Charley but behind because of arthritis and erectile dysfunction issues.
Give you a sneak, should be a good engine:
Image
Image
Image
COCKSPEED TUNING
Spanish Fly
registered user
Posts: 198
Joined: Tue Nov 30, 2010 1:23 pm
Main scooter: P200e
Contact:

IRON LINER!? Please explain. :o

It is interesting to compare Tony's Graph with Dan's current Vespa Project.
Dan's is ahead all the way up to 7500-8000 where it tails off while Tony's carry's on revving & producing more power.
I suspect Tony's would need to run significantly lower gearing to be quicker on the road than Dan's.

It wonder what effect an exchange of pipes would have on both graphs?

SF
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 10 guests