RB250 SCOOTER SHOOTOUT MOTOR

Post your Lambretta dyno graphs here! But graphs & spec info only, keep the chat in the 'dyno chat' section ;o)
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

eden wrote:
Darrell Taylor wrote:just machined it uses the pm conrod 116mm that has a very slim profile ,i believe its same as jb crank so eden has the same i think

Mine is just machined too, no need to weld the back of the casing, when i say machined what i realy mean is trenched out with a square edge 1 inch long stone fitted to my wolf drill :lol: I just took the case out until the crank turned with out catching, strangely though, I had to take a little more out for the JB crank than I had originally taken out for the Tino 62 that fell to pieces.



Darrel, what spec was the motor at this years Mallory test day?
at mallory it was at 35bhp 23 torque and wrong gearing
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
Darrell Taylor
Dealer
Posts: 752
Joined: Wed Apr 06, 2011 8:43 am
Main scooter: LAMBRETTA
Location: Doncaster
Contact:

been busy this afternoon on it tested different ign timing settings along with jetting actually richening up and found yet more in there

new peak 47.4bhp
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

^... nice work :)
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Darrell Taylor wrote:been busy this afternoon on it tested different ign timing settings along with jetting actually richening up and found yet more in there

new peak 47.4bhp
What would that be uncorrected? 50?
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Darrell Taylor wrote:
drunkmunkey6969 wrote:
Darrell Taylor wrote:cylinder porting started with welding up the triple ex port back to a single port and welding up the 2 boost transfer ports to a single small boost port leaving it a very simple 1 exhaust port 5 transfer port design....
Did you re-angle the boost port also? Made it a bit steeper maybe?
it was just a little less than std
Do you mean less as in angled more towards the exhaust, or less as in steeper towards the head? :-?
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Adam_Winstone wrote:^... nice work :)
Understatement....lol
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

drunkmunkey6969 wrote:
Darrell Taylor wrote:been busy this afternoon on it tested different ign timing settings along with jetting actually richening up and found yet more in there

new peak 47.4bhp
What would that be uncorrected? 50?
Just read PM......
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
User avatar
RICSPEED
registered user
Posts: 3334
Joined: Sun Jan 04, 2009 11:30 pm
Location: YORK

Darrell Taylor wrote:new peak 47.4bhp

needs droping in a group 6 mate :shock:
Its in bits scooter club: www.facebook.com/groups/132415046859320
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

RICSPEED wrote:
Darrell Taylor wrote:new peak 47.4bhp

needs droping in a group 6 mate :shock:
Estimated top speed with a jockey weight pilot in a geared grp6? Lol
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

Can I run a clubman on it? (lol)
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 12 guests