Re: Super Monza
Posted: Mon Jun 04, 2012 6:15 pm
the correction factor applied - 1.004 , hope this means something to you guys, steve
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
thats a positive reading figure that is due to the barometric readings not being favourable on the day but thats just how it goes some dayssteve chapman wrote:the correction factor applied - 1.004 , hope this means something to you guys, steve
Actually we have no comparisons between ours and Charleys new dyno . How much is considerably lower? His old one did read lower than ours when Tonys race bike was tested but hardly a scientific comparison.soulsurfer wrote:I guess Eden's is from Diablo's dyno, what dyno are the Rapido figures from and how would that compare to Diablo's, bearing in mind that the Performance tuning dyno reads considerably lower than Diablo's?
It would be helpful also to have the power figures alongside the torque figures for all so we can see the full picture.
You mean time or miles?eden wrote:How long between the two runs?
How much does charlie charge for a few power runs?
Sent from my GT-I9000 using Tapatalk 2
i wondered when someone would ask about this,i have noticed that dyno graph is s t r e t c h e d making this a low long spread of power/torque i'm no pc 'buff' but dyno print outs that i have had are not spread like this !Adam_Winstone wrote:Got any more details/photos of the...
"tuned rapido250 fran"
Looks great!
Adam
--------------sm-20bhp-between-4000-5500----30bhp-between-5500-8000--as-said-on-camlam-siteDarrell Taylor wrote:heres torque range soulsurfer
the idea of displaying power and torque range is so meaningful comparisons can be made, for example compared to a stock avanti(no blueprinting) you can quickly see that the avanti has good low rpm pull at 4 k having 3.5 more torque than the super monza but the sm holds 20+ tq between 6 and 8k before falling off so has excellent top end ,you can compare the motors in this format and see what pros and cons each may have and make a good guess of what gearing will work
ive added a few tuned examples for comparison too then would also be good to put a cost above each
torque figures
RPM............super monza 225.....avanti 225 fran.....tuned rapido 225 jl3.....tuned rapido250 fran...eden 240 fran
4k...................7...........................10.5.....................10..............................15............................13
5k...................8............................11.......................17.............................15............................15
6k..................20...........................15........................21..............................22...........................20
7k .................20.5........................17........................17...............................22..........................18.5
8k ................ 20...........................8........................13...............................18...........................16