Not been on here for a good few years so re-registered
My name is Paul, I ride a Series 2 with a muggy 186 Kit
Cheers
Hello
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
welcome
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
- registered user
- Posts: 1
- Joined: Thu Aug 29, 2019 12:45 pm
- Main scooter: Li 150 Special
- Contact:
Hi finally found way back to this site, after riding for a year on my last rebuild as I gave up on the last 200 engine as to many issues. So re-built the original 150 with the pace maker gearbox plus all new upgraded internals and a Mugello 186cc, Af 42mm all ported and flange matched and running with a SH22 Dell with all the airbox mods a BGM filter and a/c stator. This winter project is to fit a PX Legshield toolbox, a pair of Lucas Pathfinders and change the carburettor. This is where i'm after some help initially I was going down the road of a PHB 26 Dell but have read that the Mikuni TM..TMX 24 is possibly a better carburettor so that's my choice I also want to keep the original look too. So am after any information on what inlet manifold, connecting pipe and jetting anyone has used. Cheers Bill