Scooterotica

I painted my scoot with 1k rattle cans which for home diy was suggested as the easiest method.
Unfortunately even though it was a gloss paint it didn't produce a decent shine even after flatting and machine polishing.
I then sprayed it with gloss clear coat, again 1k rattle cans and it did result in a slightly better shine.
The problem now is that the clear coat is too soft to flat and polish even after drying for four days.
Do I play the waiting game or do I carefully rebuild and polish in a few months time?
TIA.Kev

Leave it to harden properly, depending on the air temperature, it could take several days. Do be aware though that 1k paint will dissolve on contact with petrol!!

Hiya,
yes I knew that but sadly not til after I'd done the spraying!
I'll have to keep an eye on it but at least I didn't repaint the fuel tank, that's got its original paint so fingers crossed it's ok.