Going to be attempting my 2nd spray job soonish....the orginal TV mudgaurd is fibreglass.
Is there anything I need to do differently when spraying this ?
Cheers
Fibreglass ?
- coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
Some people will tell you to use etch primer but 2k primer is all you need but give it a good going over with 240 grit or courser to give it a good key. 2 coats of 2k primer will fill sanding marks up to 80 grit.