Crashbar holes

Anything related to paint & bodywork issues on scooters....
Blenks
registered user
Posts: 166
Joined: Thu Feb 26, 2015 1:29 pm
Main scooter: Lambretta S3 Li150
Location: Coventry
Contact:

Two questions:
1. The previous owner had legshield crashbars fitted (I'm guessing) as there are two holes in the legshields. He fitted two badges over the top of the holes before I bought it. Anyway, I am stripping it down shortly to respray and generally tart up. Is it possible to fill the holes without welding? Not sure if a normal car body filler will bridge the hole and fill it. I would estimate the holes are approx. 10mm diameter. Obviously they are visible both sides so can't really patch and fill.

2. Do fibreglass panels/parts need etch priming or is a normal primer OK to use?

Thanks for any help.
Knowledge
Dealer
Posts: 957
Joined: Sun Jan 11, 2009 12:49 am
Main scooter: GP
Location: Ipswich
Contact:

I have welded them up before. What is your objection to welding?

I am no painter, but I seem to recall that fibreglass panels need etch primer. Halfords do a very good etch primer in a metallic red can.
Martin
Blenks
registered user
Posts: 166
Joined: Thu Feb 26, 2015 1:29 pm
Main scooter: Lambretta S3 Li150
Location: Coventry
Contact:

I have no objection to welding. Just not something I can do myself and one more thing to try to get organised and pay for. Thanks for the tip on the fibreglass panel pre too.
nellyboyo
registered user
Posts: 325
Joined: Wed Sep 22, 2010 10:28 am
Main scooter: Lambretta
Contact:

In my experience mate , they never look 100% unless its welded up. You can always see a bubble.
Teach yourself MIG , its brill.
I look for an excuse to weld things up nowadays ..ha
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests