Two colour panel

[philz]

Wanting to paint my side panels in two colours with celly. How can I prevent a ridge where the colours meet?

[GBCS]

Do it in base coats and then clear coat it.

[garry inglis]

you can also buy fine line masking tape witch wont leave that ridge

[Padge]

use fine line masking tape, paint both your base colours then lacquer, you will still have a "ridge" so personally I "flow coat" it by dry flatting the whole panel back with 800 grit (when lacquer cured) then another 2 coats of lacquer that will get rid of the ridge and also protect it from scratching/chipping on the edge/join

[philz]

Thanks guys.