What am I doing wrong
-
- registered user
- Posts: 194
- Joined: Fri Feb 25, 2011 9:46 pm
- Main scooter: Lambretta GP RB250
- Location: Hull
- Contact:
Could they have had oil on them ?, anti spatter spray from fabrication etc.
Did you degrease and panel wipe then before paint ?
If petrol has lifted the paint that easily it sounds like you had an adhesion problem to begin with.
Did you degrease and panel wipe then before paint ?
If petrol has lifted the paint that easily it sounds like you had an adhesion problem to begin with.
-
- registered user
- Posts: 325
- Joined: Wed Sep 22, 2010 10:28 am
- Main scooter: Lambretta
- Contact:
Ha, yes its the adhesion thats the problem . the first time I just etch primered them and rattle canned them and left them on the shelf before the rebuild.
I could see that wasn't right so a took it off , wet and dried it to give some key and sprayed them with the compressor .
Still hasn`t taken though . I`ll try again.....its arse ache thats all .
I could see that wasn't right so a took it off , wet and dried it to give some key and sprayed them with the compressor .
Still hasn`t taken though . I`ll try again.....its arse ache thats all .