Wilkos do a tin that's big enough for a few bikes for a few quid.
It's very thin, so you'd need a big brush.
matt black
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
CakeAndArseParty
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Looks like it.. different tin to the one I've got. PM me your email addres and I'll send you the pic.
CakeAndArseParty
Resurrecting an old thread here...is this type of brush on paint ok to use on bare metal?
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Bare metal?
New bodywork, or have you been a bit of a snob and rubbed it down??
And yes.. it is
New bodywork, or have you been a bit of a snob and rubbed it down??
And yes.. it is
CakeAndArseParty
Cheers. I went all posh and got the rusty scabs blasted off. Will deffo try the gloss roller, should get the paint job done for less than 20 quid I reckon. I was accused of being tight yesterday.