Reed valve crank clearance

FAQ tech questions, please check if the answer to your question is in here before posting elsewhere.
User avatar
hungdog
registered user
Posts: 169
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

Does it matter what the clearance is on reed cranks against the housing outside edge of crank ? ie thin edges.
If i had the housing enlarged to 100mm diameter and then used a standard reed crank would it work ?
User avatar
hungdog
registered user
Posts: 169
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

anyone ?
Grumpy225
registered user
Posts: 650
Joined: Sat Nov 24, 2012 7:59 am
Main scooter: Gori200, rt195, ld150,rb20
Location: Bakersfield, CA
Contact:

"the housing outside edge of crank" More info would be helpful here.

What's a "standard reed crank"? Is that like a stock hot rod?

If I had to render a guess, is this for a vespa?

Not trying to be difficult here but the details are important if you want actual relevant help.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 8 guests