sip sensor

FAQ tech questions, please check if the answer to your question is in here before posting elsewhere.
gppaul
registered user
Posts: 13
Joined: Tue May 15, 2012 8:56 am
Main scooter: GP200
Contact:

Sun Jan 29, 2017 7:46 pm

I have just got one of those SIP front hub driven speed sensors, first problem is that the knurled nut is to big for my PM tuning front hub, I've got over that hurdle, next problem is how do I set it up, I got instructions for standard cable and I've set my other scooter with the magnet type,

servetaeire
registered user
Posts: 22
Joined: Mon Apr 10, 2017 7:37 pm
Main scooter: serveta
Contact:

Tue Apr 25, 2017 4:09 pm

i was havin the same prob set it to ext in 2 in num 3 set your tyre circumfrance then 06 p

gppaul
registered user
Posts: 13
Joined: Tue May 15, 2012 8:56 am
Main scooter: GP200
Contact:

Wed May 03, 2017 6:16 am

thank you, why is it never easy, they sell you something with no instructions, brilliant, also got one of those beluga timing tools, you guessed it, no instructions.

User avatar
Kiwi
registered user
Posts: 10
Joined: Thu Jun 19, 2014 10:53 pm
ebay user ID: Macprintltd
Main scooter: lambretta GP Mugello 225
Location: Blackpool
Contact:

Thu Dec 14, 2017 12:07 am

I’ve had mine for couple years now and using magnet on front hub my settings
as follow
ADJ 1 = F miles per hour
ADJ 2 = EXT magnet
ADJ 3 = Tyre size 1295 mm set to O.2P Ratio 00.77
ADJ 4 = P3
ADJ 5 = 24 hour clock
Just a note to get Ratio of Ratio 00.77 you need to set it up first using ADJ 1 set as INT then once you have gone through settings then go back to ADJ 1 and set this at EXT
Then when you get to ADJ 3 you can set this to 0.2P hope this helps

User avatar
Muttley McLadd
registered user
Posts: 2556
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Thu Dec 14, 2017 9:18 pm

I'm sure my SIP speedo came with instructions. I can dig them out and scan when I get home, if you still need them.
There's a setting you need to select so it's looking for the magnet, rather thant he cable, too.
CakeAndArseParty

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest