Thinking of fitting a Scootopia 22mm carb
-
Scooterdude
- registered user
- Posts: 796
- Joined: Sat May 28, 2016 4:51 pm
- Main scooter: Lambretta LI 125 S3
- Location: Skaville
- Contact:
Thinking of fitting one of the Scootopia 22 mm remade delortos, at present I'm using the standard SH1/18 on my 175 stage 4 with no other mods apart from a Scootopia long cone clubman pipe. I'm not expecting rediculous amounts of extra power just a bit more upper mid range and top end as the SH1/18 seems to run out of steam. Is the Scootopia one the way to go or would I be better off with something else? Also as I already have some 5mm jets will these fit the Scootopia carb? Thanks in advance.
-
Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Do it. I'm running one. I did have one minor niggle. The gasket on the float bowl leaked, but I replaced that and it goes like a good un. Not entirely sure how you would jet it for a 175 though.
Old 20mm Dellorto's are a good carb. I've got one on a 175 kit with a SIL clubman. Main jet is 115.