water cooled twin

Anything related to Lambretta or Vespa Scooters fitted with LC, Motorcycle and/or Auto engines!
holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Thu Apr 06, 2017 9:03 pm

went out for a little ride the other night, took a pic


[imgImageIMG_0584_zpsgbdkwd1c by stephen holt, on Flickr][/img]
Last edited by holty on Sat Jul 22, 2017 9:51 am, edited 1 time in total.

holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Sat Apr 29, 2017 8:55 pm

did scarborough scooter rally, there and back on friday and saturday , no breakdowns for me, ran well.


[imgImage17861540_10154677569709755_9090254142804420348_n_zps19v1qqdt by stephen holt, on Flickr][/img]

[imgImage17952589_10154677569684755_325652446153381631_n_zpsmfxc12yk by stephen holt, on Flickr][/img]

holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Fri Jul 28, 2017 5:43 pm

cleethorpes 2017, a realy nice day, scooter ran very well, got a little warm on the way home but was fine, it was a very hot day
ImageIMG_0985 by stephen holt, on Flickr

holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Fri Aug 04, 2017 7:12 pm

outside an old garage a few miles away from me.
ImageIMG_1093 by stephen holt, on Flickr

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Fri Aug 04, 2017 7:24 pm

Still looks good holty are you going to breighton tommorw how about Gav have you heard from him

holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Sun Aug 06, 2017 9:20 pm

ImageIMG_1101 by stephen holt, on Flickr

User avatar
garry inglis
registered user
Posts: 1249
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Fri Aug 11, 2017 3:55 pm

Hi holty you no we were on about air leeks well I made some plywood plates to fit the crankcase on that 200 casing that leaked and fit gasket underneath and grease and put more jb weld over the porous welds and let it harden for a couple off days then put 4psi in and no air leeks well a bit out of the piece I put in the main bearing hole but ok I just thought I would test the casing ImageImageImage

Sent from my SM-A320FL using Tapatalk


holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Fri Aug 11, 2017 5:31 pm

good work garry, i know some people frown about using jb weld, but others swear by it, ive filled a couple of voids in my rotax conversion with it, i will leak test that when its assembled, im just playing with the exhaust at the moment, it driving me crazy, i will have another go at it tonight i think.

holty
registered user
Posts: 877
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Fri Sep 15, 2017 4:29 pm

went to a local rally a few weeks ago, took a picture while there
ImageUntitled by stephen holt, on Flickr

Scooterdude
registered user
Posts: 790
Joined: Sat May 28, 2016 4:51 pm
Main scooter: Lambretta LI 125 S3
Location: Skaville
Contact:

Fri Sep 15, 2017 4:43 pm

garry inglis wrote:
Fri Aug 11, 2017 3:55 pm
Hi holty you no we were on about air leeks well I made some plywood plates to fit the crankcase on that 200 casing that leaked and fit gasket underneath and grease and put more jb weld over the porous welds and let it harden for a couple off days then put 4psi in and no air leeks well a bit out of the piece I put in the main bearing hole but ok I just thought I would test the casing ImageImageImage

Sent from my SM-A320FL using Tapatalk
Jesus!! Who welded that Stevie Wonder? No seriously that bloke from oiltek should have made some blanking plates like that, would have saved himself and customers a whole load of hastle...just saying.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest