lambretta 290 rotax

Anything related to Lambretta or Vespa Scooters fitted with LC, Motorcycle and/or Auto engines!
holty
registered user
Posts: 808
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Sun Jul 08, 2018 10:43 pm

Imageimage by stephen holt, on Flickr
all ready tp go to cleethorpes
when we got there just had to put the scoot on the dyno just to see what power its kicking out now with some stronger clutch springs fitted, im sure it had some clutch slip when martin set it up, also its got another 300 miles on it now and its loosened up a bit more, hope the video plays ok , it made 35 bhp
happy days
ImageUntitled by stephen holt, on Flickr

holty
registered user
Posts: 808
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Wed Jul 25, 2018 5:44 pm

had a little ride out saturday to driffield, then went fo a ride to af rayspeed, scooter ran fine but it starting to get loud, end can needs re-packing
Imageimage by stephen holt, on Flickr

holty
registered user
Posts: 808
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Tue Oct 09, 2018 9:25 pm

ImageUntitled by stephen holt, on Flickr

went for a ride to rayspeed today and look who took my scoot for a test ride, non other than mr ray kemp himself, he rode up the road one way, then did a ride past the shop in the other direction while overtaking a car, awsome was the word he used to describe the experience when he got back, when asked how fast he had gone, he said " off the clock about the ton" he also said how nice it rode, very high praise from a scootering legend, wish i had videoed it, great day.

User avatar
Toddy
registered user
Posts: 4691
Joined: Sun Mar 08, 2009 12:01 am
Main scooter: Lambretta Series 1
Location: East Yorkshire
Contact:

Tue Oct 09, 2018 10:05 pm

What an honour , he’s still got it then :lol:
As my Dad used to say "Each to their own lad"

holty
registered user
Posts: 808
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Wed Oct 10, 2018 8:43 am

Toddy wrote:
Tue Oct 09, 2018 10:05 pm
What an honour , he’s still got it then :lol:
yes a big honour, i had to go home on it

holty
registered user
Posts: 808
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire
Contact:

Wed Oct 17, 2018 5:32 pm

well ive done a thousand miles now so thought it was time for some maintenance, gearbox oil changed, exhaust was blowing a bit so thought i had best remove it and have a look
ImageUntitled by stephen holt, on Flickr
turned out the exhaust had a few splits so i welded it up, then welded a patch over it as well just to re-enforce it, one of the brackets was cracked as well so i added another plate and bracket to make it stronger
ImageUntitled by stephen holt, on Flickr
ImageUntitled by stephen holt, on Flickr
i have also replaced the rubber mountings with 3 of the same type and added one to the rear can to absorb more vibrations.
i also changed the carb rubber which was fouling on my clutch cable adjuster, screwed the adjuster in and shortened the cable so it doesnt touch now, a change of plug as well, looked quite good for a 1000 miles and never been out of the engine
ImageUntitled by stephen holt, on Flickr
had some leaking headnuts so added some copper washers, seems to have fixed that problem, got it off my bench today kicked off first time, still very loud but does sound sweeter, test ride tonight

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest