Some of you will be aware of this already, but I collected these today.
Good chrome eh? Six bits for £40 and it will never need polishing. It's powder coat, that's why.
Aerocoat between Gt Yarmouth and Lowestoft are the only people who do this (you can see it on the DAC bikes) and many, many powder coat colours you have never seen before (candies, metal flake and a very sexy black chrome) and they do mail-order. Mine took a week to turn around. Call Adam or Mike on 01493 488455.
Martin
Bling! But chrome won't get you home
hi mate do they have a web site?
-
- Dealer
- Posts: 957
- Joined: Sun Jan 11, 2009 12:49 am
- Main scooter: GP
- Location: Ipswich
- Contact:
yes, but try this link instead:
http://aerocoat.net/scooterpowdercoating.htm
http://aerocoat.net/scooterpowdercoating.htm
Martin
- jason frost
- Dealer
- Posts: 485
- Joined: Wed Jan 07, 2009 11:45 am
- Contact:
Loads of people do it heres some of the candy we do.
-
- Posts: 317
- Joined: Mon Jan 05, 2009 1:43 pm
- Main scooter: Reflections in Blue
- Location: Grimsby
- Contact:
In our area we use CJ's
The colours and powderpaint types which are out now are fantastic
He does, chrome, candies & flips
Only problem is cant have any filled panel work they got to be mint.
C.J Powder Coating,
Humberston Business Centre,
Jackson Place,
Humberston,
Grimsby,
South Humberside DN36 4AS
Tel: 01472 211222
The colours and powderpaint types which are out now are fantastic
He does, chrome, candies & flips
Only problem is cant have any filled panel work they got to be mint.
C.J Powder Coating,
Humberston Business Centre,
Jackson Place,
Humberston,
Grimsby,
South Humberside DN36 4AS
Tel: 01472 211222
If its made of Metal Fettle it !!
-
- Posts: 317
- Joined: Mon Jan 05, 2009 1:43 pm
- Main scooter: Reflections in Blue
- Location: Grimsby
- Contact:
Good to see various places can do it, and we get to here about them on forums like thisKnowledge wrote:Hmmm. The diversity continues. Hoorah.
Your stuff does look good martin its amazing how chromy ( is that a word ) they look
Smiffy
If its made of Metal Fettle it !!
just been on the site to take a look very nice
-
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
According to our high end powder coater here, you can use a filler for smoothing out. He uses JB Weld(the original, not the quick set stuff)(two part steel epoxy) 'cause it takes up to 700*(fahrenheit), but I doubt you could use it on big areas. He uses it for smoothing out welds on bike framesRinB wrote:
Only problem is cant have any filled panel work they got to be mint.
That's not going anywhere...