Mag flange difference

If you want to tell us about or ask about a standard spec or restoration project....post it here.
User avatar
Suede Ed
registered user
Posts: 221
Joined: Tue Jan 13, 2009 2:01 pm
Main scooter: SIL GP200
Location: Black Country
Contact:

Building a sil 200 engine, I've got a spare 150 mag flange, is there any difference chaps?

Sent from my SM-G930F using Tapatalk

User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

The cut out that matches the transfer port from the barrel through the casing onto the mag housing will need a bit of reshape to match fit the mag and Mark it with felt tip and dremml it of
User avatar
GTFOMWSC
registered user
Posts: 290
Joined: Sat Jan 01, 2011 5:49 pm
Main scooter: GP230 Super Monza CS Tuned
Location: Rugby
Contact:

easy enough to do i did one myself rather than buy a 200 one doesn't take long
the man don't give a f@@k
User avatar
Suede Ed
registered user
Posts: 221
Joined: Tue Jan 13, 2009 2:01 pm
Main scooter: SIL GP200
Location: Black Country
Contact:

I'll dry fit it and have a look, cheers chaps
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 12 guests