Took the easy route and bought a brand new Indian GP horncast rather than repairing the butchered threads on my Italian one. I always assumed they were the same but they aren't.
The Indian one is a good 7mm narrower at the top. This means it's far too thin for the grooves on the legshields and under the headset. It just won't do so I guess it serves me right for being lazy. Just so people know and don't make the same mistake as me
Indian GP horncasts
-
- registered user
- Posts: 62
- Joined: Sat Feb 07, 2009 5:45 pm
- Main scooter: GP150
- Contact:
- jason frost
- Dealer
- Posts: 485
- Joined: Wed Jan 07, 2009 11:45 am
- Contact:
It will move, bolt it to the legshields and get some heat on it, let it cool and it should be OK
-
- registered user
- Posts: 62
- Joined: Sat Feb 07, 2009 5:45 pm
- Main scooter: GP150
- Contact:
I thought the casting was different i.e. there's less metal and its physically smaller. Thanks for the tip, think I'll pass though and repair the original