Kegra KR125 Spanish Lambretta
-
jonny snatchsniffer
- registered user
- Posts: 277
- Joined: Mon Jan 12, 2009 11:53 am
- Location: camberley, surrey
- Contact:
i remember the ads in scootering at the time but never ever saw one, what sort of power were the making ? surely that bridge needed narowing a bit
-
jason frost
- Dealer
- Posts: 485
- Joined: Wed Jan 07, 2009 11:45 am
- Contact:
Do you want one ?jonny snatchsniffer wrote:i remember the ads in scootering at the time but never ever saw one, what sort of power were the making ? surely that bridge needed narowing a bit
The inlet bridge carries the boost port so you cannot remove to much, as for power dont know what BHP but the engine was competitive with small frames of the same era considering the Lambrettas size and me Im no fly weight it was doing quite well.jonny snatchsniffer wrote:i remember the ads in scootering at the time but never ever saw one, what sort of power were the making ? surely that bridge needed narowing a bit
Tuning on the tarmac dyno of life
Tuning on the tarmac dyno of life............
Always planned to push the liner out on one of these ... bore / ports and nicasil...
Sponsors: Performance Tuning. Ve Uk. Scooter Center Koln. LTH . DRT
-
Supereibar
- registered user
- Posts: 811
- Joined: Sat Jan 17, 2009 9:17 pm
- Location: Barcelona, ESPAÑA
- Contact:
Mine is there for you to do mateytony wrote:Always planned to push the liner out on one of these ... bore / ports and nicasil...
I have another casing saved up for you .... ooops!! Spoiled the surprise!!! I want a CE engine and a TO'B engine -
grimspeed
- registered user
- Posts: 192
- Joined: Sun Dec 13, 2009 12:46 pm
- Main scooter: gp 283 kx
- Location: clitheroe lancs.
- Contact:
Just made one of these kits fit a 150 case ! Time to make a reed manifold and get the die grinder out !
any one got a picture of an exhaust for one of these ? Or just the manifold ?
any one got a picture of an exhaust for one of these ? Or just the manifold ?
i have a horrible feeling.things are going to go bang
Kegras KRD125 racer !
Tuning on the tarmac dyno of life............
-
inna halle
- registered user
- Posts: 16
- Joined: Tue Oct 13, 2009 6:37 am
- Contact:
I am looking for one of these 125 cylinder.
Maybee someone could help?
Maybee someone could help?
-
scooterslag
- registered user
- Posts: 409
- Joined: Wed Jan 07, 2009 12:23 pm
- Location: Sunny Barnstaple
- Contact:
Can anyone supply a picture of this kit? just curious to see its port layout etc
The mack daddy on the left!