Any update Rich - your 1st post suggested production release target was around the end of summer.
Still on track to make this estimate?
New Gran Turismo Crankshafts
- Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
After sometime things are progressing but we are talking about large numbers 400 cranks in one hit so it is a fair bit of investment. I'm not going to say "soon" until we are in a more informed position. What I can say is that it will be a custom 110 rod with shims on a 58 stroke with a packing plate program.
I'll also be ordering spare webs with an eccentric 24mm pin to take bigger rods like CR250 and use the pin to bring the stroke out to 60mm. This will allow specialists to build their own combinations.
I'll also be ordering spare webs with an eccentric 24mm pin to take bigger rods like CR250 and use the pin to bring the stroke out to 60mm. This will allow specialists to build their own combinations.