Page 5 of 7
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Sun May 19, 2013 5:40 pm
by soulsurfer
What's the difference with the Mk2?
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Sun May 19, 2013 6:02 pm
by Darrell Taylor
its just a slightly shorter forged type lever with a ball end,id call it version 2 as theres no real benefit other than styling preferance i hope to have both types available when there back in stock
been having supply problems on levers so found this as an alternative,but ive now used all stock of this one too
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Sun May 19, 2013 6:44 pm
by MAB
I thought just in case mate and I had some spare
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Wed Apr 23, 2014 10:53 pm
by Bilko
Just getting round to fitting mine now I've got round to getting the old LI rebuilt. Glad some lads here posted their set ups. Helpfull!
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Fri Apr 25, 2014 10:02 pm
by Darrell Taylor
Bilko wrote:Just getting round to fitting mine now I've got round to getting the old LI rebuilt. Glad some lads here posted their set ups. Helpfull!
if theres any other info you need just ask! ive now added a small alloy nipple to the kit to use as a cable end finisher and theres a few photo,s on my facebook page of them fitted up
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Thu May 15, 2014 12:37 pm
by Dell Oughta
Fitted my choke kit (came up through the fork tube, and through the headset bolt hole as its uber tight in the S1 head set, at the carb end I used a 90 degree elbow), I will re route it a later date but it'll do for now (cheers Darrell for the speedy delivery of this well made piece of kit)
Cheers
Mike
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Thu May 15, 2014 2:17 pm
by skoota2
darrell have you got choke kits made up yet please
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Thu May 15, 2014 11:17 pm
by Darrell Taylor
yes got a new batch of 50 in ,moving fast though
drop us a message and ill get one sorted for you ,cheers
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Sun Aug 24, 2014 6:28 pm
by sydduckett
I have got a couple of questions, Iv been through the post and not sure if they have been answered so bear with me....
I have a Delly vhsh, would I be able to add a little choke whilst on the move if I noticed a spike in my temp or is it on or off?
Do you have to hold it on or does it stay there ?
Thanks
Sef
Re: Handlebar choke kit /cooling/tuning aid/engine sa
Posted: Sun Aug 24, 2014 8:02 pm
by fairspares
sydduckett wrote:I have got a couple of questions, Iv been through the post and not sure if they have been answered so bear with me....
I have a Delly vhsh, would I be able to add a little choke whilst on the move if I noticed a spike in my temp or is it on or off?
Do you have to hold it on or does it stay there ?
Thanks
Sef
yes you just use your thumb and push the lever to add some choke , ive got mine set up with a stronger spring so mine returns very easy.
