New Avanti Clubman

Have a service, product or something to share with the members of Scooterotica?
User avatar
OAP
Dealer
Posts: 178
Joined: Wed Mar 17, 2010 10:16 am
Contact:

New Avanti Clubman
Not 100% ready yet, here is the first one, two days to be spent at the factory this next week to do a few mods and dyno work.
ImageImageImageImageImageImage[IMG]

Only fitted this yesterday, will come in three parts, Stub Manifold, Stainless Steel Header pipe, Silencer with adjustable bracket.
Will be giving it a run over the weekend subject to the weather!!! Will perform better than the Mk1
So Scootering Mag bring on a Dyno Shot out.
User avatar
bazman
registered user
Posts: 578
Joined: Wed Jan 07, 2009 9:02 am
Playstation gamer tag: bazman70
Location: Annan S.W. Scotland
Contact:

Had a look at this on Wed at Franspeed , (Andy francis scooters) very impressed with the build quality(as per the norm ), hope to see it in other configurations IE ts1 as thinking along the lines of standard looking ts1 which the exhaust should fit the bill and hopefully perform to suit. Will follow with interest , best of luck.
soosh
registered user
Posts: 1106
Joined: Sun May 03, 2009 2:01 pm
Main scooter: GP RS200 Iron barrel
Contact:

Looks great,hope this performs well. Got my spanners out ready to fit one,good luck with it Ron.
Dimitrios_231
registered user
Posts: 202
Joined: Mon Jan 12, 2009 4:06 pm
Contact:

It looks really good,Ron.
Lambrettatastic
registered user
Posts: 81
Joined: Wed Feb 23, 2011 11:05 pm
Contact:

any ideas on price...roughly.
mick1
registered user
Posts: 1292
Joined: Sun Dec 04, 2011 7:43 pm
Main scooter: Li Avanti 225
Location: York
Contact:

Are the parts inter-changable with the MK1 pipe? ie can the stainless steel bits be used ?
User avatar
OAP
Dealer
Posts: 178
Joined: Wed Mar 17, 2010 10:16 am
Contact:

"any ideas on price...roughly." trying to get it out for £199 retail

"Are the parts inter-changable with the MK1 pipe? ie can the stainless steel bits be used ?"
I'm afraid not Mick
User avatar
ArmandTanzarian
registered user
Posts: 1103
Joined: Wed Jan 07, 2009 6:26 pm
Location: Kent
Contact:

Looks like they'll be out at the same time as the new MB clubman. Typical, you wait ages for a new clubman and two come along at once!
Meus Lambretta est non infractus. Is est quietus.
joespeed
registered user
Posts: 740
Joined: Wed Jan 07, 2009 10:57 am
Location: drax,near selby,north yorkshire
Contact:

looks good,is there a stub to fit ts and rb,nice to see a separate stub ,just tried a 'gori' on my rapido whilst on the dyno b-----d of a thing to change, see its all spring/flexy mounted too,,
all good stuff from an experiance scooterist!
regards
joe
User avatar
OAP
Dealer
Posts: 178
Joined: Wed Mar 17, 2010 10:16 am
Contact:

Yes we will be doing a TS1, it will be run up on a Dyno using a TS1 next Friday!

Not so sure about the RB though, not much call for them, also would have to make a header pipe to suit.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 7 guests