Avanti 70mm Pistons
Avanti 70mm Piston
At long last a 70mm piston with Japanese quality at a reasonable price.
Made for us by Mitaka who has many years experience making pistons for all of the major motorcycle manufactures and the MotoX bikes.
We have had these made to fit any standard crankshaft with a 107mm rod,
Will fit any piston ported 225 conversion, i.e. Rapido, cast iron, Indian Kits.
Standard compression height, Standard length skirt, 16mm gudgeon pin 2 x 1mm rings, pure quality.
Retail Price £75.00 each
Trade Inquiries welcome
e-mail info@supertune.co
Web site: www.supertune.co
exellent option.......now what about a piston with holes in at that price?.....i think youd sell lots of ts1/rb pistons at that price...any thorts?
- carlos fandango
- registered user
- Posts: 792
- Joined: Wed Jan 07, 2009 12:51 am
- Location: Stourbridge
- Contact:
Here you gocamel wrote:exellent option.......now what about a piston with holes in at that price?.....i think youd sell lots of ts1/rb pistons at that price...any thorts?
http://www.lambrettarestore.com/225cc-7 ... 2079-p.asp
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
or
http://beedspeed.com/product_info.php?c ... ts_id=8897
On the Avanti pistons its well worth noting that they are made by the same manufacturer and practically identical, except for the 18mm small end as the TS225 pistons that have been used reliably for some time in iron / rapido conversions for some time.
http://beedspeed.com/product_info.php?c ... ts_id=5019
http://beedspeed.com/product_info.php?c ... ts_id=8897
On the Avanti pistons its well worth noting that they are made by the same manufacturer and practically identical, except for the 18mm small end as the TS225 pistons that have been used reliably for some time in iron / rapido conversions for some time.
http://beedspeed.com/product_info.php?c ... ts_id=5019
-
- registered user
- Posts: 35
- Joined: Wed Jan 07, 2009 10:45 pm
- Contact:
soullad wrote:or
http://beedspeed.com/product_info.php?c ... ts_id=8897
On the Avanti pistons its well worth noting that they are made by the same manufacturer and practically identical, except for the 18mm small end as the TS225 pistons that have been used reliably for some time in iron / rapido conversions for some time.
http://beedspeed.com/product_info.php?c ... ts_id=5019
I bought one of these pistons from Beedspeed last year to fit into an old Kegra suzuki 225 stage 5 Iron barrel, and the quality of the piston was rubbish at best. I still had the oroginal Jap piston but it was past it's best, so I was able to compare the quality and the one from Beedspeed was bad!!!
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
I've also seen these used in rd350lcs
Ricspeed, gone but never forgotten RIP my friend #59
the standard rd 350 lc piston is 64mm. Mitaka do a piston kit for these at less than £40 too... great value replacement for Imola pistons by the way, or folk making reed valve SR 185 conversions. Its the same piston as used by Rich T in his excellent GT kits.
Just fitted the 70mm Avanti piston to my 240 Mugello, looks a nice quality piston,
Better to keep quiet and be thought of as a D!ck Head, than to open your mouth and remove all doubt.