Scooterotica

Avanti 70mm Piston



At long last a 70mm piston with Japanese quality at a reasonable price.

Made for us by Mitaka who has many years experience making pistons for all of the major motorcycle manufactures and the MotoX bikes.

We have had these made to fit any standard crankshaft with a 107mm rod,
Will fit any piston ported 225 conversion, i.e. Rapido, cast iron, Indian Kits.

Standard compression height, Standard length skirt, 16mm gudgeon pin 2 x 1mm rings, pure quality.

Retail Price £75.00 each

Trade Inquiries welcome

e-mail info@supertune.co
Web site: www.supertune.co

exellent option.......now what about a piston with holes in at that price?.....i think youd sell lots of ts1/rb pistons at that price...any thorts?

camel wrote:exellent option.......now what about a piston with holes in at that price?.....i think youd sell lots of ts1/rb pistons at that price...any thorts?

Here you go
http://www.lambrettarestore.com/225cc-7 ... 2079-p.asp

or
http://beedspeed.com/product_info.php?c ... ts_id=8897

On the Avanti pistons its well worth noting that they are made by the same manufacturer and practically identical, except for the 18mm small end as the TS225 pistons that have been used reliably for some time in iron / rapido conversions for some time.

http://beedspeed.com/product_info.php?c ... ts_id=5019

soullad wrote:or
http://beedspeed.com/product_info.php?c ... ts_id=8897

On the Avanti pistons its well worth noting that they are made by the same manufacturer and practically identical, except for the 18mm small end as the TS225 pistons that have been used reliably for some time in iron / rapido conversions for some time.

http://beedspeed.com/product_info.php?c ... ts_id=5019

I bought one of these pistons from Beedspeed last year to fit into an old Kegra suzuki 225 stage 5 Iron barrel, and the quality of the piston was rubbish at best. I still had the oroginal Jap piston but it was past it's best, so I was able to compare the quality and the one from Beedspeed was bad!!!

Are we saying here the Beedspeed Piston and the Lambretta restore pistons are the same they look the same !!!!

I've also seen these used in rd350lcs

the standard rd 350 lc piston is 64mm. Mitaka do a piston kit for these at less than £40 too... great value replacement for Imola pistons by the way, or folk making reed valve SR 185 conversions. Its the same piston as used by Rich T in his excellent GT kits.

Just fitted the 70mm Avanti piston to my 240 Mugello, looks a nice quality piston,