Page 1 of 3

New Lambretta Engines from RS Tuning Conversions

Posted: Tue Apr 26, 2011 3:26 pm
by RS Tuning
New Engines built to customer requirements from £2500

Engines built to RS specification supplied complete with carb and exhaust, if required, and jetted to go.

Range of engines available from stage IV through to stage VIII (the dogs b@11@x).

• Typical RS Stage IV cast cylinder engine performance - 19bhp - using 28mm carb and expansion chamber.
• Typical RS stage VIII big port, alloy cylinder engine performance - 30bhp with 24lbs of torque – using 36mm carb and expansion chamber.

Wanting to turn the century? Also available....
Full monty engines for those wanting to be part of the exclusive RS 100mph club – cost demands serious enquiries only


• Typical quarter mile performance 12.7 seconds at over 100mph

Dateline 12th May 2002; York Raceway; 12.74 seconds; Course record still held D Scott
Dateline 13th October 2002; Elvington; 12.70 seconds; 101 mph R Saxelby

For more details on the above, or for information on other services and products available, please e-mail rstuning@hotmail.co.uk

Shop callers by appointment only. Please contact RS Tuning Conversions by e-mail, or text on 07833 915073

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Tue Apr 26, 2011 6:27 pm
by sean brady scooters
yes ,Welcome to "scooterotica" Mr Saxelby :D

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Tue Apr 26, 2011 6:31 pm
by Andy Pickering
A warm welcome Ralph, look forward to your experience on the forum..

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Tue Apr 26, 2011 7:48 pm
by RICSPEED
oi oi :fb:

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Tue Apr 26, 2011 7:55 pm
by carlos fandango
Welcome aboard Mr Saxelby :D

We could finally get an answer to this question

http://scooterotica.org/forum/viewtopic ... o+is+ralph

still makes me chuckle :lol: :lol:

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Tue Apr 26, 2011 8:25 pm
by mark
texted but no answer

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Wed Apr 27, 2011 11:54 am
by turbovan
Would like to see RS stage VIII big port, alloy cylinder pictures is it a TS1 Barrel ?

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Wed Apr 27, 2011 6:47 pm
by Muttley McLadd
Photos of Ralph's work don't go on the internet.

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Wed Apr 27, 2011 8:50 pm
by mark
got a return text today so im happy

Re: New Lambretta Engines from RS Tuning Conversions

Posted: Thu Apr 28, 2011 9:47 am
by alcoholic maniacs sc
just got back from the Elba rally with my RS tuning Ralph Saxelby fettled mk1 mugello barrelled engine/ 30mm dell'orto/big bore exhaust/iron cylinder head.efforless stump pulling torque up all those twisty mountain roads in Italy which is more than i could say about this kit in its standard bolt on form!!. while i was there i had a chat with Tino Sacchi about the latest mugello stuff, a really nice guy and gives the impression that he does everything for the pure bloody hell of it not the money. the reason i ride a scooter is because of all the characters you meet and Raplh and Tino are two of the best.